Auto&Car

Sep 22 2017

Mobrey MSP Series Ultrasonic Liquid Level Transmitters #best #msp #software

#

Mobrey MSP422, MSP400RH, and MSP900GH Ultrasonic Level Transmitters

Mobrey MSP422, MSP400RH, and MSP900GH Ultrasonic Level Transmitters

Specifications

Output Signal Measurement output:
4 20 mA on MSP422.
4 20 mA / HART on MSP400RH and MSP900GH.
Other output:
Two relays on MSP400RH.
Process Connection 2-in. NPT or BSP threaded process connections.
Optional flange accessories available
Process Wetted Material PVDF Housing Material Glass-filled nylon Operating Temperature 4 to 158 F ( 20 to 70 C) for MSP422 and MSP400RH.
40 to 140 F ( 40 to 60 C) for MSP900GH. Operating Pressure 4 to 44 psi ( 0.25 to 3.0 bar). Compatible Devices Mobrey MCU900 Series Universal Control Unit. Display/Interface Standard integral push-buttons with LCD. Cable Glands One off M20 x 1.5 cable/conduit entry on MSP422.
Two off M20 x 1.5 cable/conduit entries on MSP400RH and MSP900GH.
Ingress protection is IP 66/67 (when using supplied cable gland/blanking plug). Power Supply 12 to 30 Vdc for MSP422.
12 to 40 Vdc for MSP400RH.
MSP900GH:
12 to 40 Vdc (non-hazardous or unclassified area).
12 to 30 Vdc (hazardous or classified area). Display/Interface Standard integral push-buttons with LCD. Cable Glands One off M20 x 1.5 cable/conduit entry on MSP422.
Two off M20 x 1.5 cable/conduit entries on MSP400RH and MSP900GH.
Ingress protection is IP 66/67 (when using supplied cable gland/blanking plug). Power Supply 12 to 30 Vdc for MSP422.
12 to 40 Vdc for MSP400RH.
MSP900GH:
12 to 40 Vdc (non-hazardous or unclassified area).
12 to 30 Vdc (hazardous or classified area).

Features

  • Fast fit and commissioning for reduced start-up costs
  • Minimal maintenance costs with non-contacting technology
  • Ideal for level, contents volume, or open channel flow applications
  • Two-wire loop-powered with Intrinsic Safety (IS) hazardous are certification
  • Routine level measurement up to 40 ft. (12 m)
  • Local operator interface or remote programming
  • Inert process-wetted materials for use with corrosive materials
  • Easy configuration with Mobrey MCU900 Series Universal Controller

Written by CREDIT


Leave a Reply

Your email address will not be published. Required fields are marked *